Generac® Power and Energy Systems
As a Registered Generac® Dealer, EnFin specifies the full Generac lineup for facilities, campuses and estates: standby and prime generation, the transfer switches and switchgear that route power cleanly, estate-class residential systems, battery storage and microgrid controls, and the monitoring and service plans that keep it all running. We help you match equipment to your site's actual load and outage risk, then hand the finished specification to Continuity Power Group so you can request a quote with confidence.
Standby and prime generation
Generac's Protector® series covers gas standby units from about 15 to 150 kW for commercial buildings, agriculture and light industrial sites, while SG and SD industrial generators scale up to multi-megawatt paralleled configurations for larger campuses and mission-critical facilities. Diesel, natural gas, bi-fuel and HVO-compatible engines are available across the range, so fuel choice can follow what is actually available on site and how long a facility needs to run on its own power.
Transfer switches and switchgear
Automatic transfer switches move a facility onto generator power within seconds of an outage. Paralleling switchgear and enclosures let multiple generators work together as one larger source, adding capacity in stages as a campus grows. Every generator quote we prepare is sized alongside its matching transfer switch and switchgear from the start, so the system arrives ready to integrate rather than needing a second round of specification later.
Estate-class residential power
Liquid-cooled Generac generators from about 22 to 150 kW are built for large homes and estates that need more capacity than an air-cooled unit can deliver, often whole-property backup rather than a handful of essential circuits. Pairing one with Generac's PWRcell 2 battery storage lets the home draw from stored power first during shorter outages, with the generator engaging automatically if the outage runs longer.
Storage and microgrids
SBE Block battery storage and Generac's ARC controllers let generation, storage and switchgear work together as one coordinated microgrid instead of separate systems that each need their own oversight. This is the same storage and microgrid equipment we specify on our Commercial Solar and Storage page, and it can be added to a standby power project at the outset or layered in later as a facility's needs grow.
Monitoring and service
Generac's Mobile Link remote monitoring reports generator status and maintenance alerts from anywhere, so upkeep is scheduled rather than reactive. The ARC Microgrid Controller extends that same visibility across paralleled generation, switchgear and storage, and can be paired with an extended warranty or maintenance plan for long-term coverage.
Common questions
How do we know which Generac tier fits our site?
We look at your essential load, available fuel and how long you need to run unattended, then match that to the Protector, SG/SD or estate-class residential line rather than starting from a generic size chart.
Can storage be added to an existing standby system?
In many cases yes. SBE Block storage and ARC controllers can often be integrated alongside generation and switchgear that is already in place, though we confirm compatibility site by site.
How do we monitor the system once it's installed?
Generac's Mobile Link remote monitoring reports generator status and maintenance alerts, and can be paired with an extended warranty or maintenance plan so upkeep is scheduled rather than reactive.
Ready to move forward?
Tell us about your site and we will point you to the right program.
Ask an Advisor
Tell us about your property or project and an EnFin advisor will follow up.